GENERAL SPECIFICATIONS

HULL AND APPENDAGES

• The hull is of sandwich composite construction using Quadriaxial stitched fabrics, Divinicell composite PVC foam and Epoxy Vinyl Ester resin. This gives a stiff laminate with excellent strength and lightweight properties
• The engine beds are of GRP and bonded to the hull
• Sea-cocks under water line are Marelon and located in accessible positions
• Hose connections to inboard side of stainless steel sea-cocks have two stainless steel hose clamps
• For osmosis protection an ISO / NPG Gelcoat is used
• Standard Gelcoat colour is white
• Rudders are solid GRP boasting a 55mm solid stainless steel shaft with hydraulic steering system
• Structural bulkheads are a combination of 80 density foam and Lloyds Marine ply wood hand laminated to hull and deck
• Bulkhead thickness is 24mm for ply wood and 28mm for foam core
• Dedicated collision bulkheads at bow, at transom (to protect the engines) and at the bottom section of each keel
• Underwater epoxy - Antifouling application

DECK AND FITTINGS

• The deck is of sandwich composite construction using Quadriaxial-stitched fabrics with 80 density foam of appropriate thickness as the core
• High density material under all deck fittings with stainless steel backing plates
• Deck surface has a moulded diamond patterned non-slip finish
• Standard Gelcoat colour is white
• Electric under deck horizontal anchor windlass 24V/1500W with wired remote in foredeck anchor locker
• Large anchor cleat mounted in anchor locker
• Stainless steel anchor swivel with twin nylon anchor roller inside anchor locker
• Anchor: Stainless steel ULTRA 45kg anchor with flip swivel, 75m 10mm chain, 100m 16mm warp
• Canopy shade for foredeck and 2x foldable deck seats
• Stainless steel shroud chain plates are bolted to hull in area of structural bulkheads
• Two recessed water tank fillers fitted on coachroof so as to act as rain water collection points
• Two Diesel fillers fitted on aft top transom step
• Breathers exit above deck level
• 2 x 110v Electricity dock inlets on transom with shore power leads
• 1 x 220v Electricity dock inlet on transom with shore power lead
• Electrical stainless steel gooseneck at mast
• Fore deck hatches for storage with recessed and lockable stainless steel catches with stainless steel gas struts
• Large access opening deck hatch on port foredeck peak gives access to white flow coated locker with ladder going down into locker
• Cabin windows straight laminated glass panels with ceramic borders for UV protection
• Steaming lights on crossbeam A-frame, mast and aft targa
• Tow rail is incorporated into the deck with dedicated mounting areas for stanchions
• Two pull-pits with white moulded GRP seats
• Side railings with mid gate in solid stainless steel tubing with middle stainless steel wire. Railing height 720mm
• 8 x Large mooring cleats for marina berthing
• 2 x Transom cleats on inner hull
• Electric Roller furling self tacking Jib with curved traveller situated in front of mast step with jib sheet led aft to winch in cockpit
• Complete main-sheeting system with blocks led aft to winch in cockpit
• All lines from mast and sailing gear led aft to two main electric winches
• Sliding aluminium entrance door with 6.5mm laminated clear glass with lock
• Recessed sliding door grating in cockpit floor
• Fire extinguisher in cockpit
• Wet and dry lockers in cockpit for storage
• Large teak cockpit table incorporating world map in black polyurethane on fixed aluminum legs
• Small teak cockpit table on adjustable single aluminum leg enabling to be converted to a bed
• Wet bar in cockpit incorporating solid surfacing counter top with under mounted electric grill, sink and mixer tap
• Fridge for cockpit - Vitrifrigo C 60iX 60Ltr
• Drinks cupboard with shelves and bottle storage in wet bar with acrylic door and LED lights
• Overhead recessed LED cockpit lights
• Blue and red exterior courtesy floor lighting
• X5 LED backlit corporate logo on bulkhead in cockpit
• All lockers are self-draining and flow coated white
• One anodized aluminium structural cross beam with A-frame through bolted on bow
• Two large open net trampolines lashed to deck
• Stainless steel swimming ladder on Port side with stainless steel handrail up each stepped transom
• Integral complete overhead targa bar with soft furnishing inserts
• Build into the targa on port side a overhead shower with hot and cold water
• Pull out shower with cold and hot water fitted at top of port transom steps
• Fresh water shore connection fitted on port transom step area for connecting ships fresh water system to shore water hose
• Bimini sides and back with mesh windows that can also be closed for privacy, fitted in a recess in overhead moulding for flush look
• Recliner style sunbed on aft deck incorporating stowage underneath - stainless steel railing/cable to prevent person falling overboard
• 1 x 12 volt outlet at cockpit table
• 1 x 110 volt splash proof outlet at cockpit table
• 14 x large, non-opening recessed windows in tinted glass in hull outer sides
• Cockpit and helm cushions including backrests
• Davits on aft sunbed with remote controlled electric winches fitted in sunbed locker. Ropes and blocks included
• Handrails fitted in front top part of targa for extra security when moving up and down deck levels
• Small adjustable LED spotlights fitted on both aft sides of targa to supply light on aft steps and BBQ

HELM STATION

• All lines led back to helm for easy single handed sailing.
• Winches are 2 speed electric self tailing, size 60
• 14 x rope clutches at helm station for clutching sheets, halyards and ropes
• Extra large double seat helm chair with full length padded backrest in cockpit
• Large power dampened compass ahead of helm station in cockpit
• 1 x Garmin GMI20 multi display instrument at helm
• 1 x Garmin 16" GPSMAP chart plotter with GPS and remote keypad
• 1 x Garmin GMR Fantom 24 Dome Radar with MotionScope
• 1 x Garmin autopilot - GHP reactor 12 core pack with GHC20 display
• 1 x Garmin wired command mike
• Garmin camera installed on mast
• Glass windscreen and extended sliding cloth bimini above helm chair
• Separate moulded instrument module with angled mounting surfaces for instruments and incorporated wireless phone charge station
• Storage locker with lid for ropes below steering wheel
• C-Zone switch panel to control various systems from helm
• 1 x 12V outlet and 1 x USB outlet
• Second control with chain counter for windlass operation at cockpit
• Engine instrumentation, electronic throttle and gear controls
• 800mm, Black composite three spoke race look helm wheel
• Handrail fitted below stbd winch for easy and safe access to helm station
• Dedicated storage area for small items like phones, binoculars etc.
• Red/white light fitted at helm to provide light at night

RIGGING AND SAILS

• Spars by Sparcraft S.A.
• Spars built of extruded aluminium and anodised silver-grey
• Single spreader fractional rig with internal wiring shielded in PVC tube secured to mast
• Mast grounded through shrouds/chain plates to copper grounding plates in keels
• Batten car system for mainsail
• Boom, standing and running rigging
• Shrouds have chafe guards
• Flag halyards from bottom spreader
• Furling system for headsails
• Navigation, deck and anchor lights
• VHF aerial on top of mast.
• 2 x Bose speakers to be fitted on spreaders
• Sails by North Sails - Full batten mainsail with three reefs totalling 105m²
• Stack pack with corporate logo
• 2 x mainsail lazy-Jacks
• 1 x mainsail halyard - 12mm Spectra
• 1 x Genoa furler halyard - 8mm Spectra with Bow Shackle and sliding adjuster on mast
• 1 x Jib furler halyard - 8mm 7x19 wire with short braid section and sliding adjuster on mast
• 1 x Spinnaker / Code D halyard -12mm Spectra
• 1 x Self tacking Jib sheet - 12mm Spectra
• 1 x Main boom topping lift - 12mm Braid
• 1 x Mainsheet sheet - 12mm Spectra
• 1 x Reefline no1 - 12mm Spectra
• 1 x Reefline no2 - 12mm Spectra
• 1 x Reefline no3 - 12mm Spectra
• 1 x Fixed outhaul - 12mm Spectra
• 2 x Mainsail traveller car control lines - 10mm braid
• 2 x Genoa sheets - 12mm Super Braid
• Electric Furling 39m² Self taking Jib with UV including deck hardware
• Electric Furling 67m² Genoa with UV including deck hardware
• Code D - 130m² on bowsprit and Facnor electric furler

INTERIOR FINISHES

• All joinery work and finishing in the living areas is done in accordance with the best yacht practice, using first-grade marine materials
• All cupboard locker doors and drawers fitted with stylish pelican hook type catches in satin chrome finish
• All cupboard locker doors and drawers fitted with soft close hinges and drawer slides
• All Veneer and solid wood are of (wood to be confirmed) with a matt polyurethane acrylic lacquer for a professional and durable finish
• Interior of all cupboards where possible have lined or painted surface
• Ceilings and topside linings in (colour to be confirmed) soft touch leather furnishings
• (Colour to be confirmed) laminated hi wear flooring throughout
• Cabin mattresses is 120mm – multilayer foam with several densities covered with fabric
• Basin units, basins and galley tops made from Corian solid surfacing (colour to be confirmed)

SALOON

• Large saloon area with 360 degree panoramic view
• 75mm raised headroom
• Incorporated opening portholes in forward facing windows for ventilation
• U-shaped settee with cloth upholstery (colour to be confirmed)
• Large, convertable saloon table with internal 110V outlet for printer
• Combination shade-mosquito screens for opening deck hatches - Goiot
• Pleated blinds for saloon cabin windows
• Storage compartments under saloon seating
• Overhead stylish LED recessed ceiling lights
• Light switches to operate and dim light output
• 3 x large opening deck hatches
• Locking Sliding aluminium door with open/closed positions
• Escape hatch in saloon floor with sand blasted glass 'world map' logo
• Sliding window to cockpit
• Laminated flooring throughout
• 110V outlets
• 1 x Cabin fan
• 2 x 10000 BTU Inverter BLDC self-contained air con units with outlets at nav and settee

ENTERTAINMENT AREA

• Typical area headroom is an average of 2,05m
• Large U-shaped cupboard unit with entertainment equipment and storage drawers
• 1 x 32" LED smart television on TV lift system that can rotate from 0 to 90 degrees
• Large vertical cupboard housing refrigiration/freezer unit with small storage cupboard on the side
• 24V compressor driven door fridge-capacity 157L combined with a 2 drawer deep freezer - capacity 144L with incorporated ice maker

GALLEY AND PANTRY

• Typical area headroom is an average of 2,05m
• Galley in main saloon to Port with direct access to cockpit
• Large L-shaped counter top in solid surfacing with double under counter sink with chromed professional mixer tap
• Drinking water tap hooked to ice maker filter system
• Large double drawers under sink unit with heavy duty drawer slides
• Integrated dish draining area
• Large cupboard doors with storage
• One set of drawers
• Drawer for spice and condiments
• Rubbish bin in dedicated drawer for easy access
• 2 x Double domino style induction hobs with pot holders
• Extraction system above hob
• Speed oven with grill (convection microwave)
• Large Island unit with solid surfacing
• Large single cupboard
• Recessed overhead LED lighting
• Light switch and dimmer for overhead lighting
• Laminated flooring
• Numerous 110v outlets
• Fire extinguisher
• Fire blanket

NAVIGATION STATION

• 75mm raised headroom
• Very good 360 degree visibility due to large cabin windows
• Overhead recessed LED lighting
• Office chair at navigation station
• iPad with LaunchPort docking station and sleeve
• 1 x 110v outlet fitted on countertop
• 1 x Cabin fan
• Chart light
• L-shaped nav desk with large countertop with incorporated wireless phone charging
• Numerous cupboards with doors and drawers
• Fire extinguisher

• Custom designed switchboard with digital switching switches
• Mastervolt Easy View digital monitoring screen for selected onboard electrical equipment and charging systems
• 1 x 12V outlet
• Garmin VHF radio
• Additional 2nd Garmin GMI 20 repeater screen at inside nav station
• Garmin AIS 800 transceiver (receiver is standard)
• Fusion Apollo 770 multizone music system with 4x speakers and subwoofer in salon and 4x speakers in cockpit
• 1 x 110V outlet
• Spectra water maker control panel
• Fischer Panda generator control panel
• Port and stbd saloon air conditioner control panels
• Le Grand USB(x3) outlets

INTERIOR LAYOUT - OWNER VERSION

• 3 x cabins and 3 x en-suite heads/bathrooms

2 X PORT HULL GUEST CABINS

• Typical area headroom is an average of 2m
• Access to each of the cabins is from the saloon by a companionway. Privacy is provided by a cabin door leading to each cabin
• Queen size bed with mattress and mattress protectors and soft furnished headboard
• Island style bed with steps up each side giving separate access
• Recessed bookshelf with cabinet and wardrobe
• Extra large storage under bed with drawers
• Dressing table with drawers underneath
• Larger overhead opening deck hatches facing forward for better natural ventilation
• Combination shade-mosquito screens for opening deck hatches - Goiot
• Several large non opening hull windows
• Reading lights with built in USB outlets, overhead recessed ceiling lights, all LED
• Switch for cabin lights
• Fire extinguisher
• Laminated flooring throughout
• 110v outlets with 1 x USB outlet close to bed
• 1 x Cabin fan (each cabin)
• Pleated blinds for hull cabin windows
• 1 x 7000 BTU Inverter BLDC self-contained air con unit (per cabin) with one upper level outlet for each cabin. Control panel is fitted at bunk for easy access

2 X PORT HULL GUEST EN-SUITE BATHROOMS

• Bathroom enclosed with clear acrylic with sandblast vinyl design and dual pupose door
• Electric toilet
• Solid surfacing counter top with integrated washbasin
• Pressurized hot and cold water professional mixer tap
• Cupboard and storage underneath
• Overhead mirror storage unit for bathroom accessories. Now with increased headroom over basin area
• Opening deck hatch for ventilation
• Combination shade-mosquito screens for opening deck hatches - Goiot
• Area 1 non opening port light
• Towel rail, soap holder and toilet paper holder

1 X ENTIRE STARBOARD HULL OWNERS CABIN WITH EN-SUITE BATHROOM

• Typical area headroom is an average of 2m
• Access to the owners hull is from the saloon by a companionway and privacy is provided by a large wooden sliding door
• Large solid surfacing counter top with integral “his” and “hers” double basins
• Professional hot and cold mixer taps
• Cupboards underneath for storage
• Large mirror units above with storage for bathroom accessories
• Electric toilet
• 110V waterproof outlet
• Washer drier mounted in dedicated cupboard with removable shelves above
• A fully enclosed large shower moulding with Acrylic opening door and seat
• Opening deck hatch for ventilation
• Combination shade-mosquito screens for opening deck hatches - Goiot
• Large non opening hull window
• Towel rail, soap holder and toilet paper holder
• Overhead recessed LED lighting
• Extra large dressing table with built in drawers and Ottoman style seat
• 110V outlets with 1 x USB outlet close to bed
• Extra large wardrobes with hanging locker and shelves
• Electronic safe installed in main wardrobe
• Large Dresser unit with cupboards for storage
• Double settee/lounger with storage underneath
• Queen size bed with mattress and mattress protectors and soft furnished headboard
• Island style bed with steps up each side giving separate access
• 4 x large non opening vertical windows on outboard hull next to bed giving lots of light and vision
• Pleated blinds for hull cabin windows
• Extra large storage under bed with drawers
• Recessed bookshelf with shelf and cupboardson inboard side next to bed
• Larger overhead opening forward facing deck hatch for better natural ventilation
• Light switch and for cabin lights
• 1 x Cabin fan
• 32" Smart TV in master cabin
• 1 x 10 000 BTU Inverter BLDC self-contained air con unit with two upper level outlets. Control panel is fitted at bunk for easy access during night
• 2 x Fire extinguishers

ENGINES AND ENGINE ROOM

• Access to the engine rooms is via 2 specially moulded large hatches in the aft cockpit floor
• These hatches are lockable and feature gas struts
• Two x Yanmar Marine diesel engines Model 4JH80-TE (80HP at 3200RPM) with SD60-T sail drive units, both freshwater cooled, Stbd side coupled via the heat exchanger to a 60L Calorifier for hot water
• Each engine is mounted on a specially moulded bed
• Each engine is fitted with an additional 24V/110A High Output Mastervolt Alternator for charging the Li-Ion House Batteries trough a Charge Regulator
• Complete passive ventilation system
• Wet exhaust system including water trap, gooseneck and anti-siphon
• Gori 3 blade folding propellers with rope cutters
• Fuel capacity is 790L, 2 x tanks, 1 for each engine with shut off valve
• Fuel transfer pump to transfer fuel from one tank to another
• Fuel filter/water separator in each engine room
• Fuel tanks vented to deck via a breather with flame arrestor
• Both engines start from a dedicated engine starting battery mounted in a each engine room
• Overhead LED lights in each engine compartment
• 1 x 120amp standard alternators fitted by engine manufacturer on each engine for charging dedicated engine start battery
• Engine room soundproofed
• Fireboy automatic fire extinguishing system in each engine room
• 2 x Large capacity bilge pump with hi-water alarm in each engine room
• Emergency tiller arm supplied on dedicated brackets in stbd engine room
• Toolbox with assorted tools

PLUMBING

• All freshwater hoses of re-enforced PVC tubing with “speed fit” connections
• All hot water piping enclosed in a neoprene covering to maintain temperature over long periods of time
• 860 L rigid polyethylene water tanks in front lockers for easy removal and cleaning
• Tank vents terminate on deck
• One water heater of 60lt with 110V resistor element. Complete with strainers, check valves and accumulator tank
• All grey water from showers is discharged overboard by a automatic drain pump
• Two large capacity water pressure pumps mounted in front lockers near water tanks with accumulator tank
• Each pump draws water from the appropriate fresh water tank and service the entire boat
• 100 Ltr/26.42 US gal/min manual bilge pump, one for each hull
• Outlets are above water level and discharge overboard
• Holding tanks for 3 x toilets
• 4 x hi capacity electric bilge pumps with automatic sensors for main bilge area
• Washer drier in forward area of stbd heads. Laundry area includes removable shelves at back of washer dryer.
• Water maker - Newport 1000C (24VDC system) fully automatic with backwash/fresh water flush - 155L/41gallon/hour + Connect Controller
• Dishwasher - 45cm D/Washer - 10 place setting
• Connection for hose to hose down chain in windlass locker
• Fresh water filter for ice maker fitted in port engine room
• Drinking water tap in galley hooked to ice maker filter system
• Pull out shower with cold and hot water fitted at top of port transom steps
• Fresh water shore connection fitted on port transom step area for connecting ships fresh water system to shore water hose

ELECTRICAL

• On board DC electrics are 12/24V with two wire-insulated return
• Wires are sized to minimize voltage drop
• All light current wiring is silicon tinned wiring which is flame proof and does not give off toxic vapours
• All heavy current conductors carrying an excess of 50 Amps are 50-70mm²
• All light current conductors programmed and powered by C-Zone digital switching
• Four button waterproof wireless remote for C-Zone system
• Batteries - the ship's auxiliary load consists of 22 kWh Mastervolt Li-ion batteries (800Ah at 24V)
• A separate battery is supplied for engine starting
• For good heavy current termination, copper tinned bus bars are used
• A comprehensive DC main digital switching switch panel is located in the Nav Station
• Mastervolt Easyview for battery status monitoring
• AC circuit – including shore power inlet sockets, shore power cord, electrical panel with necessary breakers and earth leakage
• Euro American 2 pin and universal style AC outlets with USB facility fitted at various locations on the vessel
• 2 x large under water Zinc anodes fitted to hull. DC and AC are common grounded. Zinc saver
• 4 x Underwater LED lights
• Battery Charger - 1 x Mastervolt Chargmaster 24/110
• Generator - Fischer Panda 15000i PMS - 12KW/15KVA variable speed fitted in port engine room with its own sound insulation cover
• Invertor Charger - 2x Mastervolt Mass Combi 24/3000-70 (120V) 6kW total
• Solar panels - 6 x 190 Watt on saloon coach roof with MPPT solar regulator
• Solar panels - 6 x 190 Watt on targa extension with MPPT solar regulator

SAFETY EQUIPMENT

• Fendertex - inflatable fenders with custom logo (8 units with tie up ropes)
• Category 1 offshore safety equipment including 8 man life raft - Viking