Xquisite Yachts

X5 Sailing Technical Specs

 

  • GENERAL SPECIFICATIONS
    Length overall 15.44m
    Length waterline 15.15m
    Beam 8m
    Draft 1.35m
    Bridge deck clearance Light Craft 1000mm
    Mast height above waterline 24m
       
    Sail Area  
    Sail Area – Mainsail 100 m²
    Sail Area-Reacher 83 m²
    Sail Area-Jib 36 m²
       
    Engines 2 x 80 HP
    Fresh water (4x215 L tanks) 860 L
    Diesel (2x395 L tanks) 790 L
    CE Certified Category A
    Light craft displacement (mlcc) 21,000 kg
  • HULL AND APPENDAGES
    • The hull is of sandwich composite construction using Quadriaxial stitched fabrics, Divinicell composite PVC foam and Epoxy Vinyl Ester resin. This gives a stiff laminate with excellent strength and lightweight properties.
    • The engine beds are of GRP and bonded to the hull.
    • Sea-cocks under water line are Marelon and located in accessible positions.
    • Hose connections to inboard side of stainless steel sea-cocks have two stainless steel hose clamps.
    • For osmosis protection an ISO / NPG Gelcoat is used
    • Standard Gelcoat colour is white.
    • Rudders are solid GRP boasting a 55mm solid stainless steel shaft with hydraulic steering system.
    • Structural bulkheads are of Lloyds Marine ply wood construction and hand laminated to hull and deck.
    • Bulkhead thickness is 24mm.
    • Dedicated collision bulkheads at bow, at transom (to protect the engines) and at the bottom section of each keel
    • Underwater epoxy- Antifouling application
  • DECK AND FITTINGS
    • The deck is of sandwich composite construction using Quadriaxial-stitched fabrics with end grain Balsa of appropriate thickness as the core
    • High density material under all deck fittings with stainless steel backing plates.
    • Deck surface has a moulded diamond patterned non-slip finish.
    • Standard Gelcoat colour is white
    • Electric under deck horizontal anchor windlass 12v 1500 watt with wired remote in foredeck anchor locker.
    • Large anchor cleat mounted in anchor locker.
    • Stainless steel anchor swivel with twin nylon anchor roller inside anchor locker.
    • Anchor - Vulcan 55kg, 70m of 10mm chain, 100m 16mm warp.
    • Stainless steel shroud chain plates are bolted to hull in area of structural bulkheads.
    • Two recessed water tank fillers fitted on coachroof so as to act as rain water collection points
    • Two Diesel fillers fitted on aft top transom step
    • Breathers exit above deck level.
    • 2 x 110v Electricity dock inlets on transom with shore power leads
    • 1 x 220v Electricity dock inlet on transom with shore power lead
    • Electrical stainless steel gooseneck at mast.
    • Furling line lead blocks leading control lines back to cockpit
    • Fore deck hatches for storage with recessed and lockable stainless steel catches with stainless steel gas struts
    • Large access opening deck hatch on port foredeck peak gives access to white flow coated locker with ladder going down into locker.
    • Cabin windows, non-opening, in tinted glass.
    • Two x 5kg composite gas bottles with LP regulator and pressure gauge in self-ventilating gas locker in cockpit seat.
    • Steaming lights on crossbeam A-frame, mast and aft targa.
    • Stainless steel toe rail covering hull deck bond.
    • Two pull-pits with white moulded GRP seats
    • Side railings with mid gate in solid stainless steel tubing with middle stainless steel wire. Railing height 720mm
    • 8 x Large mooring cleats for marina berthing.
    • 2 x Transom cleats on inner hull
    • Roller furling self tacking Jib with curved traveller situated in front of mast step with furler control line and jib sheet led aft to winch in cockpit.
    • Complete main-sheeting system with blocks led aft to winch in cockpit.
    • All lines from mast and sailing gear led aft in recessed deck moulding with cover plates
    • Sliding aluminium entrance door with 6.5mm laminated clear glass with lock
    • Recessed sliding door grating in cockpit floor.
    • Fire extinguisher in cockpit
    • Wet and dry lockers in cockpit for storage.
    • Large teak cockpit table incorporating world map in black polyurethane on fixed aluminum legs
    • Small teak cockpit table on adjustable single aluminum leg enabling to be converted to a bed
    • Wet bar in cockpit incorporating solid surfacing counter top with under mounted GRP sink and mixer tap
    • Fridge for cockpit - Vitrifrigo C 60iX 60Ltr
    • Drinks cupboard with shelves and bottle storage in wet bar with acrylic door and LED lights
    • Overhead recessed LED cockpit lights
    • Blue exterior courtecy floor lighting
    • X5 LED backlit corporate logo on bulkhead in cockpit
    • All lockers are self-draining and flow coated white
    • One anodized aluminium structural cross beam with A-frame through bolted on bow.
    • Two large open net trampolines lashed to deck.
    • Stainless steel swimming ladder on Port side with stainless steel handrail up each stepped transom.
    • Integral complete overhead targa bar with soft furnishing inserts
    • Build into the targa on port side a overhead shower with hot and cold water
    • Bimini sides and back with mesh windows that can also be closed for privacy, fitted in a recess in overhead moulding for flush look
    • Recliner style sunbed on aft deck incorporating stowage underneath - stainless steel railing/cable to prevent person falling overboard
    • 1 x 12 volt outlet at cockpit table
    • 1 x 110 volt splash proof outlet at cockpit table
    • 14 x large, non-opening recessed windows in tinted glass in hull outer sides
    • Cockpit and helm cushions including backrests
    • Davits on aft sunbed with remote controlled electric winches fitted in sunbed locker. Ropes and blocks included. (Manual override)
  • HELM STATION
    • All lines led back to helm for easy single handed sailing.
    • Winches are 2 speed electric self tailing, size 60
    • 14 x rope clutches at helm station for clutching sheets, halyards and ropes
    • Second control (switch only) for windlass operation at cockpit
    • Extra large double seat helm chair with padded backrest in cockpit
    • Large power dampened compass ahead of helm station in cockpit.
    • Engine instrumentation, manual throttle and gear controls
    • 700mm, Stainless steel helm wheel
    • 1 x Garmin GMI20 multi display instrument at helm
    • 1 x Garmin 16" GPSMAP chart plotter with GPS and remote keypad
    • 1 x Garmin GMR 24X HD 36 mile - 4KW radar
    • 1 x Garmin autopilot - GHP reactor 12 core pack with GHC20 display
    • 1 x Garmin GHS10 wired command mike
    • Glass windscreen and extended sliding cloth bimini above helm chair
    • Separate moulded instrument module with angled mounting surfaces for instruments and incorporated cup holder
    • Storage locker with lid for ropes below steering wheel
    • C-Zone switch panel to control various systems from helm
    • 1 x 12V outlet and 1 x USB outlet
    • Second control with chain counter for windlass operation at cockpit
    • Engine instrumentation, electronic throttle and gear controls
    • 800mm, Black composite three spoke race look helm wheel
  • RIGGING AND SAILS
    • Spars by Sparcraft S.A.
    • Spars built of extruded aluminium and anodised silver-grey.
    • Single spreader fractional rig with internal wiring shielded in PVC tube secured to mast.
    • Mast grounded through shrouds/chain plates to copper grounding plates in keels
    • Batten car system for mainsail
    • Boom, standing and running rigging.
    • Shrouds have chafe guards
    • Flag halyards from bottom spreader
    • Furling system for headsails.
    • Navigation, deck and anchor lights
    • VHF aerial on top of mast.
    • Sails by North Sails - Full batten mainsail with three reefs totalling 100m²
    • Stack pack with corporate logo.
    • 2 x mainsail lazy-Jacks
    • 1 x mainsail halyard - 14mm Spectra
    • 1 x Reacher furler halyard - 8mm 7x19 wire with short braid section and sliding adjuster on mast
    • 1 x Jib furler halyard - 8mm 7x19 wire with short braid section and sliding adjuster on mast
    • 1 x Spinnaker halyard -12mm Spectra
    • 1 x Self tacking Jib sheet - 12mm Spectra
    • 1 x Main boom topping lift - 12mm Braid
    • 1 x Mainsheet sheet -12mm Spectra
    • 1 x Reefline no1 - 12mm Spectra
    • 1 x Reefline no2 - 12mm Spectra
    • 1 x Reefline no3 - 12mm Spectra
    • 1 x Fixed outhaul - 12mm Spectra
    • 2 x Mainsail traveller car control lines - 10mm braid
    • 2 x Reacher sheets - 14mm Spectra
    • Furling 36m² Self taking Jib with UV including deck hardware
    • Furling 83m² Reacher with UV including deck hardware
    • 1 x Reacher furling line - 10mm Spectra Braid
    • 1 x Jib furling line - 10mm Spectra Braid
  • INTERIOR FINISHES
    • All joinery work and finishing in the living areas is done in accordance with the best yacht practice, using first-grade marine materials.
    • All Veneer and solid wood are of V20 Oak limed wash 178.42 with a matt polyurethane acrylic lacquer for a professional and durable finish.
    • Interior of all cupboards where possible have lined or painted surface
    • Ceilings and topside linings in light cream soft touch leather furnishings
    • Dark brown plastic laminated hi wear flooring throughout
    • Cabin mattresses is 120mm – multilayer foam with several densities covered with fabric.
    • Basin units, basins and galley tops made from Corian solid surfacing
  • SALOON
    • Large saloon area with 360 degree panoramic view
    • Opening forward window for ventilation
    • U-shaped settee with cloth upholstery
    • Large, convertable saloon table with internal 110V outlet for printer
    • Combination shade-mosquito screens for opening deck hatches - Goiot
    • Pleated blinds for saloon cabin windows
    • Storage compartments under saloon seating
    • Overhead stylish LED recessed ceiling lights.
    • Light switches to operate and dim light output
    • 3 x large opening deck hatches
    • Locking Sliding aluminium door with open/closed positions (Titanium finish)
    • Escape hatch in saloon floor with sand blasted glass 'world map' logo
    • Sliding window to cockpit.
    • Laminated flooring throughout.
    • 110V outlets
    • 1 x Cabin fan - Hella Turbo 2
    • 2 x 12 000 BTU air con units with outlets at nav and settee
  • ENTERTAINMENT AREA
    • Large U-shaped cupboard unit with entertainment equipment and storage drawers
    • 1 x 40" LED smart television with built in media player on TV lift system
    • Large vertical cupboard housing refrigiration/freezer unit with small storage cupboard on the side
    • 12v compressor driven door fridge-capacity 157L combined with a 2 drawer deep freezer - capacity 144L with incorporated ice maker
  • GALLEY AND PANTRY
    • Galley in main saloon to Port with direct access to cockpit
    • Large L-shaped counter top in solid surfacing with double under counter sink with chromed professional mixer tap
    • Large double drawers under sink unit with heavy duty drawer slides
    • Integrated dish draining area.
    • Large cupboard doors with storage
    • One set of drawers.
    • Drawer for spice and condiments
    • Rubbish bin in dedicated drawer for easy access
    • Four-burner gas hob with flame failure device and pot holders.
    • Extraction system above hob
    • Speed oven with grill (convection microwave)
    • Large Island unit with solid surfacing
    • Large single cupboard
    • Recessed overhead LED lighting.
    • Light switch and dimmer for overhead lighting
    • Electronic Gas shut off valve/alarm with 1 x sniffer
    • Laminated flooring.
    • Numerous 110v outlets
    • Fire extinguisher
    • Fire blanket
  • NAVIGATION STATION
    • Situated in port front section of saloon and forward facing.
    • Very good 360 degree visibility due to large cabin windows
    • Opening forward window for ventilation
    • Mounted in a console is a custom designed switchboard with digital switching switches and digital battery monitoring system
    • L-shaped nav desk with large countertop
    • Numerous cupboards with doors and drawers.
    • 1 x 110v outlet and 1 x 110v outlet with USB
    • 1 x 12 volt outlet
    • Chart light
    • Overhead recessed LED lighting
    • Fire extinguisher
    • 1 x Garmin 300 VHF radio with AIS receiver
    • 1 x Fusion MS IP 700i series music system with 4 x MS-FR7021 7" 260watt marine speakers (two in saloon and two in cockpit)
    • Office chair at navigation station
    • iPad with LaunchPort wall mount docking station and sleeve
    • Le Grand USB (x3) outlet fitted to dashboard
  • INTERIOR LAYOUT - OWNER VERSION
    • 3 x cabins and 3 x en-suite heads/bathrooms
  • 2 X PORT HULL GUEST CABINS
    • Access to each of the cabins is from the saloon by a companionway. Privacy is provided by a cabin door leading to each cabin
    • Large 1.95m x 1.4m bed with soft furnished headboard.
    • Island style bed with steps up each side giving separate access.
    • Recessed bookshelf with cabinet and wardrobe
    • Extra large storage under bed with drawers
    • Dressing table with drawers underneath
    • Overhead opening deck hatch for ventilation
    • Combination shade-mosquito screens for opening deck hatches - Goiot
    • Several large non opening hull windows
    • Reading lights, overhead recessed ceiling lights, all LED
    • Switch for cabin lights
    • Fire extinguisher
    • Laminated flooring throughout
    • 110v outlets with 1 x USB outlet close to bed
    • 1 x Cabin fan - Hella Turbo 2 (each cabin)
    • Pleated blinds for hull cabin windows
    • 1 x 8000 BTU air con unit (per cabin) with one upper level outlet for each cabin
  • 2 X PORT HULL GUEST EN-SUITE BATHROOMS
    • Bathroom enclosed with clear acrylic with sandblast vinyl design and dual pupose door
    • Electric toilet
    • Solid surfacing counter top with integrated washbasin
    • Pressurized hot and cold water professional mixer tap
    • Cupboard and storage underneath
    • Overhead mirror unit with storage for bathroom accessories
    • Opening deck hatch for ventilation.
    • Combination shade-mosquito screens for opening deck hatches - Goiot
    • Opening Area 1 non opening port light
    • Towel rail, soap holder and tiolet paper holder
  • 1 X ENTIRE STARBOARD HULL OWNERS CABIN WITH EN-SUITE BATHROOM
    • Access to the owners hull is from the saloon by a companionway and privacy is provided by a large wooden sliding door
    • Large solid surfacing counter top with integral “his” and “hers” double basins
    • Professional hot and cold mixer taps
    • Cupboards underneath for storage
    • Large mirror units above with storage for bathroom accessories
    • Electric toilet
    • 110V waterproof outlet
    • Washer drier mounted in dedicated cupboard with removable shelves above
    • A fully enclosed large shower moulding with Acrylic opening door and seat
    • Opening deck hatch for ventilation
    • Combination shade-mosquito screens for opening deck hatches - Goiot
    • Large non opening hull window
    • Towel rail, soap holder and toilet paper holder
    • Overhead recessed LED lighting
    • Extra large dressing table with built in desk with drawers
    • 110v outlets with 1 x USB outlet close to bed
    • Extra large wardrobes with hanging locker and shelves
    • Electronic safe installed in main wardrobe
    • Large Dresser unit with cupboards for storage
    • Double settee/lounger with storage underneath
    • King-size 1.95m x 1.4m bed with soft furnished headboard
    • Island style bed with steps up each side giving separate access
    • 4 x large non opening vertical windows on outboard hull next to bed giving lots of light and vision
    • Pleated blinds for hull cabin windows
    • Extra large storage under bed with drawers
    • Recessed bookshelf with shelf and cupboardson inboard side next to bed
    • Overhead opening deck hatch
    • Light switch and for cabin lights
    • 1 x Cabin fan - Hella Turbo 2
    • 1 x 12 000 BTU air con unit with two upper level outlets
  • ENGINES AND ENGINE ROOM
    • Access to the engine rooms is via 2 specially moulded large hatches in the aft cockpit floor.
    • These hatches are lockable and feature gas struts
    • Two x Yanmar Marine diesel engines Model 4JH80-TE (80HP at 3200RPM) with SD60-T sail drive units, both freshwater cooled, Stbd side coupled via the heat exchanger to a 60L Calorifier for hot water.
    • Each engine is mounted on a specially moulded bed
    • Complete passive ventilation system
    • Wet exhaust system including water trap, gooseneck and anti-siphon
    • Yanmar fixed 3 blade propeller
    • Fuel capacity is 790L, 2 x tanks, 1 for each engine with shut off valve
    • Fuel transfer pump to transfer fuel from one tank to another
    • Fuel filter/water separator in each engine room
    • Fuel tanks vented to deck via a breather with flame arrestor
    • Both engines start from a dedicated engine starting battery mounted in a each engine room.
    • Overhead LED lights in each engine compartment
    • 2 x 120amp standard alternators fitted by engine manufacturer
    • Engine room soundproofed.
    • Fireboy automatic fire extinguishing system in each engine room
    • 2 x Large capacity bilge pump with hi-water alarm in each engine room
    • Engine room soundproofed
    • Emergency tiller arm supplied on dedicated brackets in stbd engine room.
    • Toolbox with assorted tools
  • PLUMBING
    • All freshwater hoses of re-enforced PVC tubing with “speed fit” connections
    • All hot water piping enclosed in a neoprene covering to maintain temperature over long periods of time
    • 860 L rigid polyethylene water tanks in front lockers for easy removal and cleaning
    • Tank vents terminate on deck
    • One water heater of 60lt with 110V resistor element. Complete with strainers, check valves and accumulator tank
    • All grey water from showers is discharged overboard by a automatic drain pump
    • Two large capacity water pressure pumps mounted in front lockers near water tanks with accumulator tank
    • Each pump draws water from the appropriate fresh water tank and service the entire boat
    • 100 Ltr/26.42 US gal/min manual bilge pump, one for each hull
    • Outlets are above water level and discharge overboard
    • Holding tanks for 3 x toilets
    • 4 x hi capacity electric bilge pumps with automatic sensors for main bilge area
    • Washer drier in forward area of stbd heads. Laundry area includes removable shelves at back of washer dryer.
    • Water maker - Newport 400 NP-MK II-400S fully automatic with backwash/fresh water flush - 62Ltr + Connect Controller
    • Dishwasher - 45cm D/Washer - 10 place setting
    • Connection for hose to hose down chain in windlass locker
    • Fresh water filter for ice maker fitted in cupboard next to fridge
  • ELECTRICAL
    • On board DC electrics are 12V with two wire-insulated return
    • Wires are sized to minimize voltage drop
    • All light current wiring is silicon tinned wiring which is flame proof and does not give off toxic vapours
    • All light current conductors carrying an excess of 50 Amps are 50-70mm².
    • All light current conductors programmed and powered by C-Zone digital switching
    • Batteries - the ship's auxiliary load consists of 6 x 750 Ahr 2V Gel batteries.
    • A separate battery is supplied for engine starting.
    • For good heavy current termination, copper tinned bus bars are used.
    • A comprehensive DC main digital switching switch panel is located in the Nav Station
    • Mastervolt Easyview for battery status monitoring
    • AC circuit – including shore power inlet socket, 25m/65’6” shore power cord, electrical panel with necessary breakers and earth leakage
    • Euro American universal 2 pin style AC outlets with USB facility fitted at various locations on the vessel
    • 2 x large under water Zinc anodes fitted to hull. DC and AC are common grounded. Zinc saver
    • Charger - 1 x Mastervolt Chargmaster 12/100-3 100amp battery charger
    • Genset - Fischer Panda 15000i PMS - 12KW/15KVA variable speed
    • Invertor Charger - Mastervolt Mass Combi 12/2500-120V/60HZ
    • Solar panels - 6 x 145 Watt on saloon coachroof with 1 x 60 Amp Mastervolt MPPT solar regulator
  • SAFETY EQUIPMENT
    • 8 fenders / 10 x 10m 18mm tie up ropes
    • Category 1 offshore safety equipment including 8 man life raft - Viking
GENERAL SPECIFICATIONS
Length overall 15.44m
Length waterline 15.15m
Beam 8m
Draft 1.35m
Bridge deck clearance Light Craft 1000mm
Mast height above waterline 24m
   
Sail Area  
Sail Area – Mainsail 100 m²
Sail Area-Reacher 83 m²
Sail Area-Jib 36 m²
   
Engines 2 x 80 HP
Fresh water (4x215 L tanks) 860 L
Diesel (2x395 L tanks) 790 L
CE Certified Category A
Light craft displacement (mlcc) 21,000 kg
GENERAL SPECIFICATIONS - X5 SAIL
HULL AND APPENDAGES
  • The hull is of sandwich composite construction using Quadriaxial stitched fabrics, Divinicell composite PVC foam and Epoxy Vinyl Ester resin. This gives a stiff laminate with excellent strength and lightweight properties.
  • The engine beds are of GRP and bonded to the hull.
  • Sea-cocks under water line are Marelon and located in accessible positions.
  • Hose connections to inboard side of stainless steel sea-cocks have two stainless steel hose clamps.
  • For osmosis protection an ISO / NPG Gelcoat is used
  • Standard Gelcoat colour is white.
  • Rudders are solid GRP boasting a 55mm solid stainless steel shaft with hydraulic steering system.
  • Structural bulkheads are of Lloyds Marine ply wood construction and hand laminated to hull and deck.
  • Bulkhead thickness is 24mm.
  • Dedicated collision bulkheads at bow, at transom (to protect the engines) and at the bottom section of each keel
  • Underwater epoxy- Antifouling application
DECK AND FITTINGS
  • The deck is of sandwich composite construction using Quadriaxial-stitched fabrics with end grain Balsa of appropriate thickness as the core
  • High density material under all deck fittings with stainless steel backing plates.
  • Deck surface has a moulded diamond patterned non-slip finish.
  • Standard Gelcoat colour is white
  • Electric under deck horizontal anchor windlass 12v 1500 watt with wired remote in foredeck anchor locker.
  • Large anchor cleat mounted in anchor locker.
  • Stainless steel anchor swivel with twin nylon anchor roller inside anchor locker.
  • Anchor - Vulcan 55kg, 70m of 10mm chain, 100m 16mm warp.
  • Stainless steel shroud chain plates are bolted to hull in area of structural bulkheads.
  • Two recessed water tank fillers fitted on coachroof so as to act as rain water collection points
  • Two Diesel fillers fitted on aft top transom step
  • Breathers exit above deck level.
  • 2 x 110v Electricity dock inlets on transom with shore power leads
  • 1 x 220v Electricity dock inlet on transom with shore power lead
  • Electrical stainless steel gooseneck at mast.
  • Furling line lead blocks leading control lines back to cockpit
  • Fore deck hatches for storage with recessed and lockable stainless steel catches with stainless steel gas struts
  • Large access opening deck hatch on port foredeck peak gives access to white flow coated locker with ladder going down into locker.
  • Cabin windows, non-opening, in tinted glass.
  • Two x 5kg composite gas bottles with LP regulator and pressure gauge in self-ventilating gas locker in cockpit seat.
  • Steaming lights on crossbeam A-frame, mast and aft targa.
  • Stainless steel toe rail covering hull deck bond.
  • Two pull-pits with white moulded GRP seats
  • Side railings with mid gate in solid stainless steel tubing with middle stainless steel wire. Railing height 720mm
  • 8 x Large mooring cleats for marina berthing.
  • 2 x Transom cleats on inner hull
  • Roller furling self tacking Jib with curved traveller situated in front of mast step with furler control line and jib sheet led aft to winch in cockpit.
  • Complete main-sheeting system with blocks led aft to winch in cockpit.
  • All lines from mast and sailing gear led aft in recessed deck moulding with cover plates
  • Sliding aluminium entrance door with 6.5mm laminated clear glass with lock
  • Recessed sliding door grating in cockpit floor.
  • Fire extinguisher in cockpit
  • Wet and dry lockers in cockpit for storage.
  • Large teak cockpit table incorporating world map in black polyurethane on fixed aluminum legs
  • Small teak cockpit table on adjustable single aluminum leg enabling to be converted to a bed
  • Wet bar in cockpit incorporating solid surfacing counter top with under mounted GRP sink and mixer tap
  • Fridge for cockpit - Vitrifrigo C 60iX 60Ltr
  • Drinks cupboard with shelves and bottle storage in wet bar with acrylic door and LED lights
  • Overhead recessed LED cockpit lights
  • Blue exterior courtecy floor lighting
  • X5 LED backlit corporate logo on bulkhead in cockpit
  • All lockers are self-draining and flow coated white
  • One anodized aluminium structural cross beam with A-frame through bolted on bow.
  • Two large open net trampolines lashed to deck.
  • Stainless steel swimming ladder on Port side with stainless steel handrail up each stepped transom.
  • Integral complete overhead targa bar with soft furnishing inserts
  • Build into the targa on port side a overhead shower with hot and cold water
  • Bimini sides and back with mesh windows that can also be closed for privacy, fitted in a recess in overhead moulding for flush look
  • Recliner style sunbed on aft deck incorporating stowage underneath - stainless steel railing/cable to prevent person falling overboard
  • 1 x 12 volt outlet at cockpit table
  • 1 x 110 volt splash proof outlet at cockpit table
  • 14 x large, non-opening recessed windows in tinted glass in hull outer sides
  • Cockpit and helm cushions including backrests
  • Davits on aft sunbed with remote controlled electric winches fitted in sunbed locker. Ropes and blocks included. (Manual override)
HELM STATION
  • All lines led back to helm for easy single handed sailing.
  • Winches are 2 speed electric self tailing, size 60
  • 14 x rope clutches at helm station for clutching sheets, halyards and ropes
  • Second control (switch only) for windlass operation at cockpit
  • Extra large double seat helm chair with padded backrest in cockpit
  • Large power dampened compass ahead of helm station in cockpit.
  • Engine instrumentation, manual throttle and gear controls
  • 700mm, Stainless steel helm wheel
  • 1 x Garmin GMI20 multi display instrument at helm
  • 1 x Garmin 16" GPSMAP chart plotter with GPS and remote keypad
  • 1 x Garmin GMR 24X HD 36 mile - 4KW radar
  • 1 x Garmin autopilot - GHP reactor 12 core pack with GHC20 display
  • 1 x Garmin GHS10 wired command mike
  • Glass windscreen and extended sliding cloth bimini above helm chair
  • Separate moulded instrument module with angled mounting surfaces for instruments and incorporated cup holder
  • Storage locker with lid for ropes below steering wheel
  • C-Zone switch panel to control various systems from helm
  • 1 x 12V outlet and 1 x USB outlet
  • Second control with chain counter for windlass operation at cockpit
  • Engine instrumentation, electronic throttle and gear controls
  • 800mm, Black composite three spoke race look helm wheel
RIGGING AND SAILS
  • Spars by Sparcraft S.A.
  • Spars built of extruded aluminium and anodised silver-grey.
  • Single spreader fractional rig with internal wiring shielded in PVC tube secured to mast.
  • Mast grounded through shrouds/chain plates to copper grounding plates in keels
  • Batten car system for mainsail
  • Boom, standing and running rigging.
  • Shrouds have chafe guards
  • Flag halyards from bottom spreader
  • Furling system for headsails.
  • Navigation, deck and anchor lights
  • VHF aerial on top of mast.
  • Sails by North Sails - Full batten mainsail with three reefs totalling 100m²
  • Stack pack with corporate logo.
  • 2 x mainsail lazy-Jacks
  • 1 x mainsail halyard - 14mm Spectra
  • 1 x Reacher furler halyard - 8mm 7x19 wire with short braid section and sliding adjuster on mast
  • 1 x Jib furler halyard - 8mm 7x19 wire with short braid section and sliding adjuster on mast
  • 1 x Spinnaker halyard -12mm Spectra
  • 1 x Self tacking Jib sheet - 12mm Spectra
  • 1 x Main boom topping lift - 12mm Braid
  • 1 x Mainsheet sheet -12mm Spectra
  • 1 x Reefline no1 - 12mm Spectra
  • 1 x Reefline no2 - 12mm Spectra
  • 1 x Reefline no3 - 12mm Spectra
  • 1 x Fixed outhaul - 12mm Spectra
  • 2 x Mainsail traveller car control lines - 10mm braid
  • 2 x Reacher sheets - 14mm Spectra
  • Furling 36m² Self taking Jib with UV including deck hardware
  • Furling 83m² Reacher with UV including deck hardware
  • 1 x Reacher furling line - 10mm Spectra Braid
  • 1 x Jib furling line - 10mm Spectra Braid
INTERIOR FINISHES
  • All joinery work and finishing in the living areas is done in accordance with the best yacht practice, using first-grade marine materials.
  • All Veneer and solid wood are of V20 Oak limed wash 178.42 with a matt polyurethane acrylic lacquer for a professional and durable finish.
  • Interior of all cupboards where possible have lined or painted surface
  • Ceilings and topside linings in light cream soft touch leather furnishings
  • Dark brown plastic laminated hi wear flooring throughout
  • Cabin mattresses is 120mm – multilayer foam with several densities covered with fabric.
  • Basin units, basins and galley tops made from Corian solid surfacing
SALOON
  • Large saloon area with 360 degree panoramic view
  • Opening forward window for ventilation
  • U-shaped settee with cloth upholstery
  • Large, convertable saloon table with internal 110V outlet for printer
  • Combination shade-mosquito screens for opening deck hatches - Goiot
  • Pleated blinds for saloon cabin windows
  • Storage compartments under saloon seating
  • Overhead stylish LED recessed ceiling lights.
  • Light switches to operate and dim light output
  • 3 x large opening deck hatches
  • Locking Sliding aluminium door with open/closed positions (Titanium finish)
  • Escape hatch in saloon floor with sand blasted glass 'world map' logo
  • Sliding window to cockpit.
  • Laminated flooring throughout.
  • 110V outlets
  • 1 x Cabin fan - Hella Turbo 2
  • 2 x 12 000 BTU air con units with outlets at nav and settee
ENTERTAINMENT AREA
  • Large U-shaped cupboard unit with entertainment equipment and storage drawers
  • 1 x 40" LED smart television with built in media player on TV lift system
  • Large vertical cupboard housing refrigiration/freezer unit with small storage cupboard on the side
  • 12v compressor driven door fridge-capacity 157L combined with a 2 drawer deep freezer - capacity 144L with incorporated ice maker
GALLEY AND PANTRY
  • Galley in main saloon to Port with direct access to cockpit
  • Large L-shaped counter top in solid surfacing with double under counter sink with chromed professional mixer tap
  • Large double drawers under sink unit with heavy duty drawer slides
  • Integrated dish draining area.
  • Large cupboard doors with storage
  • One set of drawers.
  • Drawer for spice and condiments
  • Rubbish bin in dedicated drawer for easy access
  • Four-burner gas hob with flame failure device and pot holders.
  • Extraction system above hob
  • Speed oven with grill (convection microwave)
  • Large Island unit with solid surfacing
  • Large single cupboard
  • Recessed overhead LED lighting.
  • Light switch and dimmer for overhead lighting
  • Electronic Gas shut off valve/alarm with 1 x sniffer
  • Laminated flooring.
  • Numerous 110v outlets
  • Fire extinguisher
  • Fire blanket
NAVIGATION STATION
  • Situated in port front section of saloon and forward facing.
  • Very good 360 degree visibility due to large cabin windows
  • Opening forward window for ventilation
  • Mounted in a console is a custom designed switchboard with digital switching switches and digital battery monitoring system
  • L-shaped nav desk with large countertop
  • Numerous cupboards with doors and drawers.
  • 1 x 110v outlet and 1 x 110v outlet with USB
  • 1 x 12 volt outlet
  • Chart light
  • Overhead recessed LED lighting
  • Fire extinguisher
  • 1 x Garmin 300 VHF radio with AIS receiver
  • 1 x Fusion MS IP 700i series music system with 4 x MS-FR7021 7" 260watt marine speakers (two in saloon and two in cockpit)
  • Office chair at navigation station
  • iPad with LaunchPort wall mount docking station and sleeve
  • Le Grand USB (x3) outlet fitted to dashboard
INTERIOR LAYOUT
OWNER VERSION
  • 3 x cabins and 3 x en-suite heads/bathrooms
2 X PORT HULL GUEST CABINS
  • Access to each of the cabins is from the saloon by a companionway. Privacy is provided by a cabin door leading to each cabin
  • Large 1.95m x 1.4m bed with soft furnished headboard.
  • Island style bed with steps up each side giving separate access.
  • Recessed bookshelf with cabinet and wardrobe
  • Extra large storage under bed with drawers
  • Dressing table with drawers underneath
  • Overhead opening deck hatch for ventilation
  • Combination shade-mosquito screens for opening deck hatches - Goiot
  • Several large non opening hull windows
  • Reading lights, overhead recessed ceiling lights, all LED
  • Switch for cabin lights
  • Fire extinguisher
  • Laminated flooring throughout
  • 110v outlets with 1 x USB outlet close to bed
  • 1 x Cabin fan - Hella Turbo 2 (each cabin)
  • Pleated blinds for hull cabin windows
  • 1 x 8000 BTU air con unit (per cabin) with one upper level outlet for each cabin
2 X PORT HULL GUEST EN-SUITE BATHROOMS
  • Bathroom enclosed with clear acrylic with sandblast vinyl design and dual pupose door
  • Electric toilet
  • Solid surfacing counter top with integrated washbasin
  • Pressurized hot and cold water professional mixer tap
  • Cupboard and storage underneath
  • Overhead mirror unit with storage for bathroom accessories
  • Opening deck hatch for ventilation.
  • Combination shade-mosquito screens for opening deck hatches - Goiot
  • Opening Area 1 non opening port light
  • Towel rail, soap holder and tiolet paper holder
1 X ENTIRE STARBOARD HULL OWNERS CABIN WITH EN-SUITE BATHROOM
  • Access to the owners hull is from the saloon by a companionway and privacy is provided by a large wooden sliding door
  • Large solid surfacing counter top with integral “his” and “hers” double basins
  • Professional hot and cold mixer taps
  • Cupboards underneath for storage
  • Large mirror units above with storage for bathroom accessories
  • Electric toilet
  • 110V waterproof outlet
  • Washer drier mounted in dedicated cupboard with removable shelves above
  • A fully enclosed large shower moulding with Acrylic opening door and seat
  • Opening deck hatch for ventilation
  • Combination shade-mosquito screens for opening deck hatches - Goiot
  • Large non opening hull window
  • Towel rail, soap holder and toilet paper holder
  • Overhead recessed LED lighting
  • Extra large dressing table with built in desk with drawers
  • 110v outlets with 1 x USB outlet close to bed
  • Extra large wardrobes with hanging locker and shelves
  • Electronic safe installed in main wardrobe
  • Large Dresser unit with cupboards for storage
  • Double settee/lounger with storage underneath
  • King-size 1.95m x 1.4m bed with soft furnished headboard
  • Island style bed with steps up each side giving separate access
  • 4 x large non opening vertical windows on outboard hull next to bed giving lots of light and vision
  • Pleated blinds for hull cabin windows
  • Extra large storage under bed with drawers
  • Recessed bookshelf with shelf and cupboardson inboard side next to bed
  • Overhead opening deck hatch
  • Light switch and for cabin lights
  • 1 x Cabin fan - Hella Turbo 2
  • 1 x 12 000 BTU air con unit with two upper level outlets
ENGINES AND ENGINE ROOM
  • Access to the engine rooms is via 2 specially moulded large hatches in the aft cockpit floor.
  • These hatches are lockable and feature gas struts
  • Two x Yanmar Marine diesel engines Model 4JH80-TE (80HP at 3200RPM) with SD60-T sail drive units, both freshwater cooled, Stbd side coupled via the heat exchanger to a 60L Calorifier for hot water.
  • Each engine is mounted on a specially moulded bed
  • Complete passive ventilation system
  • Wet exhaust system including water trap, gooseneck and anti-siphon
  • Yanmar fixed 3 blade propeller
  • Fuel capacity is 790L, 2 x tanks, 1 for each engine with shut off valve
  • Fuel transfer pump to transfer fuel from one tank to another
  • Fuel filter/water separator in each engine room
  • Fuel tanks vented to deck via a breather with flame arrestor
  • Both engines start from a dedicated engine starting battery mounted in a each engine room.
  • Overhead LED lights in each engine compartment
  • 2 x 120amp standard alternators fitted by engine manufacturer
  • Engine room soundproofed.
  • Fireboy automatic fire extinguishing system in each engine room
  • 2 x Large capacity bilge pump with hi-water alarm in each engine room
  • Engine room soundproofed
  • Emergency tiller arm supplied on dedicated brackets in stbd engine room.
  • Toolbox with assorted tools
PLUMBING
  • All freshwater hoses of re-enforced PVC tubing with “speed fit” connections
  • All hot water piping enclosed in a neoprene covering to maintain temperature over long periods of time
  • 860 L rigid polyethylene water tanks in front lockers for easy removal and cleaning
  • Tank vents terminate on deck
  • One water heater of 60lt with 110V resistor element. Complete with strainers, check valves and accumulator tank
  • All grey water from showers is discharged overboard by a automatic drain pump
  • Two large capacity water pressure pumps mounted in front lockers near water tanks with accumulator tank
  • Each pump draws water from the appropriate fresh water tank and service the entire boat
  • 100 Ltr/26.42 US gal/min manual bilge pump, one for each hull
  • Outlets are above water level and discharge overboard
  • Holding tanks for 3 x toilets
  • 4 x hi capacity electric bilge pumps with automatic sensors for main bilge area
  • Washer drier in forward area of stbd heads. Laundry area includes removable shelves at back of washer dryer.
  • Water maker - Newport 400 NP-MK II-400S fully automatic with backwash/fresh water flush - 62Ltr + Connect Controller
  • Dishwasher - 45cm D/Washer - 10 place setting
  • Connection for hose to hose down chain in windlass locker
  • Fresh water filter for ice maker fitted in cupboard next to fridge
ELECTRICAL
  • On board DC electrics are 12V with two wire-insulated return
  • Wires are sized to minimize voltage drop
  • All light current wiring is silicon tinned wiring which is flame proof and does not give off toxic vapours
  • All light current conductors carrying an excess of 50 Amps are 50-70mm².
  • All light current conductors programmed and powered by C-Zone digital switching
  • Batteries - the ship's auxiliary load consists of 6 x 750 Ahr 2V Gel batteries.
  • A separate battery is supplied for engine starting.
  • For good heavy current termination, copper tinned bus bars are used.
  • A comprehensive DC main digital switching switch panel is located in the Nav Station
  • Mastervolt Easyview for battery status monitoring
  • AC circuit – including shore power inlet socket, 25m/65’6” shore power cord, electrical panel with necessary breakers and earth leakage
  • Euro American universal 2 pin style AC outlets with USB facility fitted at various locations on the vessel
  • 2 x large under water Zinc anodes fitted to hull. DC and AC are common grounded. Zinc saver
  • Charger - 1 x Mastervolt Chargmaster 12/100-3 100amp battery charger
  • Genset - Fischer Panda 15000i PMS - 12KW/15KVA variable speed
  • Invertor Charger - Mastervolt Mass Combi 12/2500-120V/60HZ
  • Solar panels - 6 x 145 Watt on saloon coachroof with 1 x 60 Amp Mastervolt MPPT solar regulator
SAFETY EQUIPMENT
  • 8 fenders / 10 x 10m 18mm tie up ropes
  • Category 1 offshore safety equipment including 8 man life raft - Viking

 

Contact Us
1000 characters left