X5 PLUS Technical Specs
INTERIOR LAYOUT – OWNER VERSION
3 x cabins and 3 x en-suite heads/bathrooms
3 x cabins and 3 x en-suite heads/bathrooms
- GENERAL SPECIFICATIONS
- HULL AND APPENDAGES
- DECK AND FITTINGS
- HELM STATION
- RIGGING AND SAILS
- INTERIOR FINISHES
- SALOON
- ENTERTAINMENT AREA
- GALLEY AND PANTRY
- NAVIGATION STATION
- 2 X PORT HULL GUEST CABINS
- 2 X PORT HULL GUEST EN-SUITE BATHROOMS
- 1 X ENTIRE STARBOARD HULL OWNERS CABIN WITH EN-SUITE BATHROOM
- ENGINES AND ENGINE ROOM
- PLUMBING
- ELECTRICAL
- SAFETY EQUIPMENT
- OPTIONAL EXTRAS
GENERAL SPECIFICATIONS
Length overall 16.63m / 54′ Length hull 15.44m / 50.5′ Beam 8m / 26.2′ Draft 1.35m / 4.4′ Bridge deck clearance Light Craft 1000mm / 3.3′ Mast height above waterline 24m / 78.7′ Sail Area – Mainsail 105 m² / 1130 sqf Sail Area – Genoa 65 m² / 721 sqf Sail Area – Jib 39 m² / 420 sqf Sail Area – Code 65 135 m² / 1400 sqf Engines 2 x 80 HP Fresh water (4×215 L tanks) 860 L / 227 gal Diesel (2×395 L tanks) 790 L / 208 gal CE Certified Category A Light craft displacement 16500 kg / 36376 lbs HULL AND APPENDAGES
- The hull is of sandwich composite construction using Quadriaxial stitched fabrics, Divinicell composite PVC foam and Epoxy Vinyl Ester resin. This gives a stiff laminate with excellent strength and lightweight properties
- The engine beds are of GRP and bonded to the hull
- Sea-cocks under water line are Marelon and located in accessible positions
- Hose connections to inboard side of stainless steel sea-cocks have two stainless steel hose clamps
- For osmosis protection an ISO / NPG Gelcoat is used
- Standard Gelcoat colour is white
- Rudders are solid GRP boasting a 55mm solid stainless steel shaft with hydraulic steering system
- Structural bulkheads are a combination of 80 density foam and Lloyds Marine ply wood hand laminated to hull and deck
- Bulkhead thickness is 24mm for ply wood and 28mm for foam core
- Dedicated collision bulkheads at bow, at transom (to protect the engines) and at the bottom section of each keel
- Underwater epoxy – Antifouling application
DECK AND FITTINGS
- The deck is of sandwich composite construction using Quadriaxial-stitched fabrics with 80 density foam of appropriate thickness as the core
- High density material under all deck fittings with stainless steel backing plates
- Deck surface has a moulded diamond patterned non-slip finish
- Standard Gelcoat colour is white
- Electric under deck horizontal anchor windlass 24V/1500W with wired remote in foredeck anchor locker
- Large anchor cleat mounted in anchor locker
- Stainless steel anchor swivel with twin nylon anchor roller inside anchor locker
- Anchor: Stainless steel ULTRA 45kg anchor with flip swivel, 75m 10mm chain, 100m 16mm warp
- Canopy shade for foredeck and 2x foldable deck seats
- Stainless steel shroud chain plates are bolted to hull in area of structural bulkheads
- Two recessed water tank fillers fitted on coachroof so as to act as rain water collection points
- Two Diesel fillers fitted on aft top transom step
- Breathers exit above deck level
- 2 x 110v Electricity dock inlets on transom with shore power leads
- 1 x 220v Electricity dock inlet on transom with shore power lead
- Electrical stainless steel gooseneck at mast
- Fore deck hatches for storage with recessed and lockable stainless steel catches with stainless steel gas struts
- Large access opening deck hatch on port foredeck peak gives access to white flow coated locker with ladder going down into locker
- Cabin windows straight laminated glass panels with ceramic borders for UV protection
- Steaming lights on crossbeam A-frame, mast and aft targa
- Tow rail is incorporated into the deck with dedicated mounting areas for stanchions
- Two pull-pits with white moulded GRP seats
- Side railings with mid gate in solid stainless steel tubing with middle stainless steel wire. Railing height 720mm
- 8 x Large mooring cleats for marina berthing
- 2 x Transom cleats on inner hull
- Electric Roller furling self tacking Jib with curved traveller situated in front of mast step with jib sheet led aft to winch in cockpit
- Complete main-sheeting system with blocks led aft to winch in cockpit
- All lines from mast and sailing gear led aft to two main electric winches
- Sliding aluminium entrance door with 6.5mm laminated clear glass with lock
- Recessed sliding door grating in cockpit floor
- Fire extinguisher in cockpit
- Wet and dry lockers in cockpit for storage
- Large teak cockpit table incorporating world map in black polyurethane on fixed aluminum legs
- Small teak cockpit table on adjustable single aluminum leg enabling to be converted to a bed
- Wet bar in cockpit incorporating solid surfacing counter top with under mounted electric grill, sink and mixer tap
- Fridge for cockpit – Vitrifrigo C 60iX 60Ltr
- Drinks cupboard with shelves and bottle storage in wet bar with acrylic door and LED lights
- Overhead recessed LED cockpit lights
- Blue and red exterior courtesy floor lighting
- X5 LED backlit corporate logo on bulkhead in cockpit
- All lockers are self-draining and flow coated white
- One anodized aluminium structural cross beam with A-frame through bolted on bow
- Two large open net trampolines lashed to deck
- Stainless steel swimming ladder on Port side with stainless steel handrail up each stepped transom
- Integral complete overhead targa bar with soft furnishing inserts
- Build into the targa on port side a overhead shower with hot and cold water
- Pull out shower with cold and hot water fitted at top of port transom steps
- Fresh water shore connection fitted on port transom step area for connecting ships fresh water system to shore water hose
- Bimini sides and back with mesh windows that can also be closed for privacy, fitted in a recess in overhead moulding for flush look
- Recliner style sunbed on aft deck incorporating stowage underneath – stainless steel railing/cable to prevent person falling overboard
- 1 x 12 volt outlet at cockpit table
- 1 x 110 volt splash proof outlet at cockpit table
- 14 x large, non-opening recessed windows in tinted glass in hull outer sides
- Cockpit and helm cushions including backrests
- Davits on aft sunbed with remote controlled electric winches fitted in sunbed locker. Ropes and blocks included
- Handrails fitted in front top part of targa for extra security when moving up and down deck levels
- Small adjustable LED spotlights fitted on both aft sides of targa to supply light on aft steps and BBQ
- Two fishing rod holders installed (one on each side) of the Targa
HELM STATION
- All lines led back to helm for easy single handed sailing.
- Winches are 2 speed electric self tailing, size 60
- 14 x rope clutches at helm station for clutching sheets, halyards and ropes
- Extra large double seat helm chair with full length padded backrest in cockpit
- Large power dampened compass ahead of helm station in cockpit
- 1 x Garmin GMI20 multi display instrument at helm
- 1 x Garmin 16″ GPSMAP chart plotter with GPS and remote keypad
- 1 x Garmin GMR Fantom 24 Dome Radar with MotionScope
- 1 x Garmin autopilot – GHP reactor 12 core pack with GHC20 display
- 1 x Garmin wired command mike
- Garmin camera installed on mast
- Glass windscreen and extended sliding cloth bimini above helm chair
- Separate moulded instrument module with angled mounting surfaces for instruments and incorporated wireless phone charge station
- Storage locker with lid for ropes below steering wheel
- C-Zone switch panel to control various systems from helm
- 1 x 12V outlet and 1 x USB outlet
- Second control with chain counter for windlass operation at cockpit
- Engine instrumentation, electronic throttle and gear controls
- 800mm, Black composite three spoke race look helm wheel
- Handrail fitted below stbd winch for easy and safe access to helm station
- Dedicated storage area for small items like phones, binoculars etc.
- Red/white light fitted at helm to provide light at night
RIGGING AND SAILS
- Spars by Sparcraft S.A.
- Spars built of extruded aluminium and anodised silver-grey
- Single spreader fractional rig with internal wiring shielded in PVC tube secured to mast
- Mast grounded through shrouds/chain plates to copper grounding plates in keels
- Batten car system for mainsail
- Boom, standing and running rigging
- Shrouds have chafe guards
- Flag halyards from bottom spreader
- Furling system for headsails
- Navigation, deck and anchor lights
- VHF aerial on top of mast.
- 2 x Bose speakers to be fitted on spreaders
- Sails by North Sails – Full batten mainsail with three reefs totalling 105m²
- Stack pack with corporate logo
- 2 x mainsail lazy-Jacks
- 1 x mainsail halyard – 12mm Spectra
- 1 x Genoa furler halyard – 8mm Spectra with Bow Shackle and sliding adjuster on mast
- 1 x Jib furler halyard – 8mm Spectra with Bow Shackle and sliding adjuster on mast
- 1 x Spinnaker / Code D halyard -12mm Spectra
- 1 x Self tacking Jib sheet – 12mm Spectra
- 1 x Main boom topping lift – 12mm Braid
- 1 x Mainsheet sheet – 12mm Spectra
- 1 x Reefline no1 – 12mm Spectra
- 1 x Reefline no2 – 12mm Spectra
- 1 x Reefline no3 – 12mm Spectra
- 1 x Fixed outhaul – 12mm Spectra
- 2 x Mainsail traveller car control lines – 10mm braid
- 2 x Genoa sheets – 12mm Super Braid
- Electric Furling 39m² Self taking Jib with UV including deck hardware
- Electric Furling 65m² Genoa with UV including deck hardware
- Code 65 – 135m² on bowsprit and Facnor electric furler
INTERIOR FINISHES
- All joinery work and finishing in the living areas is done in accordance with the best yacht practice, using first-grade marine materials
- All cupboard locker doors and drawers fitted with stylish pelican hook type catches in satin chrome finish
- All cupboard locker doors and drawers fitted with soft close hinges and drawer slides
- All Veneer and solid wood are of (wood to be confirmed) with a matt polyurethane acrylic lacquer for a professional and durable finish
- Interior of all cupboards where possible have lined or painted surface
- Ceilings and topside linings in (colour to be confirmed) soft touch leather furnishings
- (Colour to be confirmed) laminated hi wear flooring throughout
- Cabin mattresses is 120mm – multilayer foam with several densities covered with fabric
- Basin units, basins and galley tops made from Corian solid surfacing (colour to be confirmed)
SALOON
- Large saloon area with 360 degree panoramic view
- 75mm raised headroom
- Incorporated opening portholes in forward facing windows for ventilation
- U-shaped settee with cloth upholstery (colour to be confirmed)
- Large, convertible saloon table with internal 110V outlet for printer
- Combination shade-mosquito screens for opening deck hatches – Goiot
- Pleated blinds for saloon cabin windows
- Storage compartments under saloon seating
- Overhead stylish LED recessed ceiling lights
- Light switches to operate and dim light output
- 3 x large opening deck hatches
- Locking Sliding aluminium door with open/closed positions
- Escape hatch in saloon floor with sand blasted glass ‘world map’ logo
- Sliding window to cockpit
- Laminated flooring throughout
- 110V outlets
- 1 x Cabin fan
- 2 x 10000 BTU Inverter BLDC self-contained air con units with outlets at nav and settee
ENTERTAINMENT AREA
- Typical area headroom is an average of 2,05m
- Large U-shaped cupboard unit with entertainment equipment and storage drawers
- 1 x 43″ LED smart television on TV lift system that can rotate from 0 to 90 degrees
- Large vertical cupboard housing refrigeration/freezer unit with small storage cupboard on the side
- 24V compressor driven door fridge-capacity 157L combined with a 2 drawer deep freezer – capacity 144L with incorporated ice maker
GALLEY AND PANTRY
- Typical area headroom is an average of 2,05m
- Galley in main saloon to Port with direct access to cockpit
- Large L-shaped counter top in solid surfacing with double under counter sink with chromed professional mixer tap
- Drinking water tap hooked to ice maker filter system
- Large double drawers under sink unit with heavy duty drawer slides
- Integrated dish draining area
- Large cupboard doors with storage
- One set of drawers
- Drawer for spice and condiments
- Rubbish bin in dedicated drawer for easy access
- 2 x Double domino style induction hobs with pot holders
- Extraction system above hob
- Speed oven with grill (convection microwave)
- Large Island unit with solid surfacing
- Large single cupboard
- Recessed overhead LED lighting
- Light switch and dimmer for overhead lighting
- Laminated flooring
- Numerous 110v outlets
- Fire extinguisher
- Fire blanket
NAVIGATION STATION
- 75mm raised headroom
- Very good 360 degree visibility due to large cabin windows
- Overhead recessed LED lighting
- Office chair at navigation station
- iPad with LaunchPort docking station and sleeve
- 1 x 110v outlet fitted on countertop
- 1 x Cabin fan
- Chart light
- L-shaped nav desk with large countertop with incorporated wireless phone charging
- Numerous cupboards with doors and drawers
- Fire extinguisher
MOUNTED IN A PRACTICAL AND NEAT ARRANGEMENT INTO A STYLISH AND MODERN DASHBOARD ARE THE BELOW MENTIONED EQUIPMENT- Custom designed switchboard with digital switching switches
- Mastervolt Easy View digital monitoring screen for selected onboard electrical equipment and charging systems
- 1 x 12V outlet
- Garmin VHF radio
- Additional 2nd Garmin GMI 20 repeater screen at inside nav station
- Garmin AIS 800 transceiver (receiver is standard)
- Fusion Apollo 770 multizone music system with 4x speakers and subwoofer in salon and 4x speakers in cockpit
- 1 x 110V outlet
- Spectra water maker control panel
- Fischer Panda generator control panel
- Port and stbd saloon air conditioner control panels
- Le Grand USB(x3) outlets
2 X PORT HULL GUEST CABINS
- Typical area headroom is an average of 2m
- Access to each of the cabins is from the saloon by a companionway. Privacy is provided by a cabin door leading to each cabin
- Queen size bed with mattress and mattress protectors and soft furnished headboard
- Island style bed with steps up each side giving separate access
- Recessed bookshelf with cabinet and wardrobe
- Extra large storage under bed with drawers
- Dressing table with drawers underneath
- Larger overhead opening deck hatches facing forward for better natural ventilation
- Combination shade-mosquito screens for opening deck hatches – Goiot
- Several large non opening hull windows
- Reading lights with built in USB outlets, overhead recessed ceiling lights, all LED
- Switch for cabin lights
- Fire extinguisher
- Laminated flooring throughout
- 110v outlets with 1 x USB outlet close to bed
- 1 x Cabin fan (each cabin)
- Pleated blinds for hull cabin windows
- 1 x 7000 BTU Inverter BLDC self-contained air con unit (per cabin) with one upper level outlet for each cabin. Control panel is fitted at bunk for easy access
2 X PORT HULL GUEST EN-SUITE BATHROOMS
- Bathroom enclosed with clear acrylic with sandblast vinyl design and dual purpose door
- Electric toilet
- Solid surfacing counter top with integrated washbasin
- Pressurized hot and cold water professional mixer tap
- Cupboard and storage underneath
- Overhead mirror storage unit for bathroom accessories. Now with increased headroom over basin area
- Opening deck hatch for ventilation
- Combination shade-mosquito screens for opening deck hatches – Goiot
- Area 1 non opening port light
- Towel rail, soap holder and toilet paper holder
1 X ENTIRE STARBOARD HULL OWNERS CABIN WITH EN-SUITE BATHROOM
- Typical area headroom is an average of 2m
- Access to the owners hull is from the saloon by a companionway and privacy is provided by a large wooden sliding door
- Large solid surfacing counter top with integral “his” and “hers” double basins
- Professional hot and cold mixer taps
- Cupboards underneath for storage
- Large mirror units above with storage for bathroom accessories
- Electric toilet
- 110V waterproof outlet
- Washer drier mounted in dedicated cupboard with removable shelves above
- A fully enclosed large shower moulding with Acrylic opening door and seat
- Opening deck hatch for ventilation
- Combination shade-mosquito screens for opening deck hatches – Goiot
- Large non opening hull window
- Towel rail, soap holder and toilet paper holder
- Overhead recessed LED lighting
- Extra large dressing table with built in drawers and Ottoman style seat
- 110V outlets with 1 x USB outlet close to bed
- Extra large wardrobes with hanging locker and shelves
- Electronic safe installed in main wardrobe
- Large Dresser unit with cupboards for storage
- Double settee/lounger with storage underneath
- Queen size bed with mattress and mattress protectors and soft furnished headboard
- Island style bed with steps up each side giving separate access
- 4 x large non opening vertical windows on outboard hull next to bed giving lots of light and vision
- Pleated blinds for hull cabin windows
- Extra large storage under bed with drawers
- Recessed bookshelf with shelf and cupboards on inboard side next to bed
- Larger overhead opening forward facing deck hatch for better natural ventilation
- Light switch and for cabin lights
- 1 x Cabin fan
- 32″ Smart TV in master cabin
- 1 x 10 000 BTU Inverter BLDC self-contained air con unit with two upper level outlets. Control panel is fitted at bunk for easy access during night
- 2 x Fire extinguishers
ENGINES AND ENGINE ROOM
- Access to the engine rooms is via 2 specially moulded large hatches in the aft cockpit floor
- These hatches are lockable and feature gas struts
- Two x Yanmar Marine diesel engines Model 4JH80-TE (80HP at 3200RPM) with SD60-T sail drive units, both freshwater cooled, Stbd side coupled via the heat exchanger to a 60L Calorifier for hot water
- Each engine is mounted on a specially moulded bed
- Each engine is fitted with an additional 24V/110A High Output Mastervolt Alternator for charging the Li-Ion House Batteries trough a Charge Regulator
- Complete passive ventilation system
- Wet exhaust system including water trap, gooseneck and anti-siphon
- Gori 3 blade folding propellers with rope cutters
- Fuel capacity is 790L, 2 x tanks, 1 for each engine with shut off valve
- Fuel transfer pump to transfer fuel from one tank to another
- Fuel filter/water separator in each engine room
- Fuel tanks vented to deck via a breather with flame arrestor
- Both engines start from a dedicated engine starting battery mounted in a each engine room
- Overhead LED lights in each engine compartment
- 1 x 120amp standard alternators fitted by engine manufacturer on each engine for charging dedicated engine start battery
- Engine room soundproofed
- Fireboy automatic fire extinguishing system in each engine room
- 2 x Large capacity bilge pump with hi-water alarm in each engine room
- Emergency tiller arm supplied on dedicated brackets in stbd engine room
- Toolbox with assorted tools
PLUMBING
- All freshwater hoses of re-enforced PVC tubing with “speed fit” connections
- All hot water piping enclosed in a neoprene covering to maintain temperature over long periods of time
- 860 L rigid polyethylene water tanks in front lockers for easy removal and cleaning
- Tank vents terminate on deck
- One water heater of 60lt with 110V resistor element. Complete with strainers, check valves and accumulator tank
- All grey water from showers is discharged overboard by a automatic drain pump
- Two large capacity water pressure pumps mounted in front lockers near water tanks with accumulator tank
- Each pump draws water from the appropriate fresh water tank and service the entire boat
- 100 Ltr/26.42 US gal/min manual bilge pump, one for each hull
- Outlets are above water level and discharge overboard
- Holding tanks for 3 x toilets
- 4 x hi capacity electric bilge pumps with automatic sensors for main bilge area
- Washer drier in forward area of stbd heads. Laundry area includes removable shelves at back of washer dryer.
- Water maker – Newport 1000C (24VDC system) fully automatic with backwash/fresh water flush – 155L/41gallon/hour + Connect Controller
- Dishwasher – 45cm D/Washer – 10 place setting
- Connection for hose to hose down chain in windlass locker
- Fresh water filter for ice maker fitted in port engine room
- Drinking water tap in galley hooked to ice maker filter system
- Pull out shower with cold and hot water fitted at top of port transom steps
- Fresh water shore connection fitted on port transom step area for connecting ships fresh water system to shore water hose
ELECTRICAL
- On board DC electrics are 12/24V with two wire-insulated return
- Wires are sized to minimize voltage drop
- All light current wiring is silicon tinned wiring which is flame proof and does not give off toxic vapours
- All heavy current conductors carrying an excess of 50 Amps are 50-70mm²
- All light current conductors programmed and powered by C-Zone digital switching
- Four button waterproof wireless remote for C-Zone system
- Batteries – the ship’s auxiliary load consists of 22 kWh Mastervolt Li-ion batteries (800Ah at 24V)
- A separate battery is supplied for engine starting
- For good heavy current termination, copper tinned bus bars are used
- A comprehensive DC main digital switching switch panel is located in the Nav Station
- Mastervolt Easyview for battery status monitoring
- AC circuit – including shore power inlet sockets, shore power cord, electrical panel with necessary breakers and earth leakage
- Euro American 2 pin and universal style AC outlets with USB facility fitted at various locations on the vessel
- 2 x large under water Zinc anodes fitted to hull. DC and AC are common grounded. Zinc saver
- 4 x Underwater LED lights
- Battery Charger – 1 x Mastervolt Chargmaster 24V/110A
- Generator – Fischer Panda 15000i PMS – 12KW/15KVA variable speed fitted in port engine room with its own sound insulation cover
- Invertor Charger – 2x Mastervolt Mass Combi 24/3000-70 (120V) 6kW total
- Solar panels – 6 x 190 Watt on saloon coach roof with MPPT solar regulator
- Solar panels – 6 x 190 Watt on targa extension with MPPT solar regulator
SAFETY EQUIPMENT
- Fendertex – inflatable fenders with custom logo (8 units with tie up ropes)
- Category 1 offshore safety equipment including 8 man life ra